Cylinder #2 Misfire Detected
The BOBCAT-P0302 (Bobcat) diesel fault code means: Cylinder #2 Misfire Detected. This is a serious severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
- Estimated cost
- $400-$1,800
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Misfire count elevated on cylinder 2
- Rough idle, visible smoke
Probable Causes (Ranked by Likelihood)
- Bad injector cylinder 2 Likely
- Low compression on that cylinder Possible
- Valve clearance out of spec (500 hr check) Possible
Step-by-Step Diagnostic Procedure
Swap injector from another cylinder to confirm if misfire follows.
Wet/dry compression test on cylinder 2.
Check valve lash to Kubota spec.
Frequently Asked Questions
What is Bobcat code P0302?
Bobcat P0302: Cylinder #2 Misfire Detected. This code is reported on Bobcat equipment running the described engine family.
Can I keep working with Bobcat code P0302?
Limited operation only -- finish the current task then shut down for repair.
How much does Bobcat P0302 cost to fix?
Typical repair cost: $400-$1,800. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Bobcat Service Analyzer) is usually required.
P0302 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown: