Random / Multiple Cylinder Misfire
The BOBCAT-P0300 (Bobcat) diesel fault code means: Random / Multiple Cylinder Misfire. This is a serious severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
- Estimated cost
- $400-$2,500
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Rough running
- Vibration at idle
- Smoke
Probable Causes (Ranked by Likelihood)
- Fuel injector copper seat washer failure Likely
- Low compression on one cylinder Possible
- Stale diesel in seasonal equipment Likely
Step-by-Step Diagnostic Procedure
Run cylinder cutout test in Bobcat Service Analyzer.
Inspect injector return-flow balance.
Pull injectors to inspect copper washers/spray tips.
Frequently Asked Questions
What is Bobcat code P0300?
Bobcat P0300: Random / Multiple Cylinder Misfire. This code is reported on Bobcat equipment running the described engine family.
Can I keep working with Bobcat code P0300?
Limited operation only -- finish the current task then shut down for repair.
How much does Bobcat P0300 cost to fix?
Typical repair cost: $400-$2,500. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Bobcat Service Analyzer) is usually required.
P0300 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown: