P2093 moderate

Intake Manifold Runner Control Circuit High (Bank 2) - Position 'A'

The P2093 code means the vehicle's onboard diagnostic system has detected: Intake Manifold Runner Control Circuit High (Bank 2) - Position 'A'. This is a moderate severity code.

My Garage →

Keep driving?: Yes, but fix soon
DIY difficulty: moderate
Estimated cost: $100 - $500 (parts and labor)

Recommended Tool

ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This

AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

Check Engine Light on
Reduced Bank 2 mid-range power
Acceleration hesitation
Rough idle conditions
Intake resonance noise

Probable Causes (Ranked by Likelihood)

Open or high resistance in Bank 2 runner control wiring Very High
Short to voltage in Bank 2 actuator circuit High
Failed Bank 2 actuator with open coil Moderate
Corroded Bank 2 ground Low

Step-by-Step Diagnostic Procedure

Check Bank 2 actuator connector for corrosion
Measure Bank 2 actuator resistance
Inspect Bank 2 wiring for opens
Test ECM output at Bank 2 actuator

Frequently Asked Questions

What does P2093 indicate?

P2093 indicates: Intake Manifold Runner Control Circuit High (Bank 2) - Position 'A'. The ECM detected an issue requiring diagnosis.

Is P2093 urgent?

Moderate priority. Schedule a repair.

What should I check first?

Start with a visual inspection of the sensor wiring and connector. Then use a scan tool to read live data and compare to expected values. A multimeter can verify sensor resistance and circuit integrity.