Intake Manifold Runner Control Circuit Low (Bank 2) - Position 'A'
The P2092 code means the vehicle's onboard diagnostic system has detected: Intake Manifold Runner Control Circuit Low (Bank 2) - Position 'A'. This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $100 - $500 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- Reduced torque at mid-range RPMs
- Hesitation on Bank 2
- Rough idle
- Possible intake noise
Probable Causes (Ranked by Likelihood)
- Short to ground in Bank 2 runner control circuit Very High
- Shorted Bank 2 runner actuator High
- Wiring damage near Bank 2 intake Moderate
- ECM Bank 2 driver fault Low
Step-by-Step Diagnostic Procedure
-
Measure Bank 2 actuator voltage
-
Check Bank 2 wiring for shorts
-
Test Bank 2 actuator resistance
-
Inspect Bank 2 wiring routing
Frequently Asked Questions
What does P2092 indicate?
P2092 indicates: Intake Manifold Runner Control Circuit Low (Bank 2) - Position 'A'. The ECM detected an issue requiring diagnosis.
Is P2092 urgent?
Moderate priority. Schedule a repair.
What should I check first?
Start with a visual inspection of the sensor wiring and connector. Then use a scan tool to read live data and compare to expected values. A multimeter can verify sensor resistance and circuit integrity.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.