Fuel Volume Regulator Control Circuit Open
The P0001 code means the vehicle's onboard diagnostic system has detected: Fuel Volume Regulator Control Circuit Open. This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $150 - $600 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- Hard starting
- Engine stalling
- Reduced engine power
Probable Causes (Ranked by Likelihood)
- Faulty fuel volume regulator solenoid Very High
- Open or shorted wiring to fuel volume regulator High
- Corroded connector at fuel volume regulator Moderate
- Failed ECM/PCM Low
Step-by-Step Diagnostic Procedure
-
Read freeze frame data and note engine operating conditions when the code was set
-
Inspect wiring and connector to the fuel volume regulator on the high-pressure fuel pump for damage or corrosion
-
Measure resistance across the fuel volume regulator solenoid terminals and compare to manufacturer specification (typically 1-6 ohms)
-
Use a scan tool to command the fuel volume regulator and verify it responds properly
Frequently Asked Questions
What does the fuel volume regulator do?
The fuel volume regulator controls how much fuel the high-pressure pump delivers to the fuel rail. It adjusts fuel volume based on engine demand to maintain proper rail pressure while improving efficiency.
Is P0001 only found on diesel engines?
While P0001 is most common on direct-injection diesel engines that use high-pressure common rail systems, it can also appear on gasoline direct injection (GDI) engines that have a similar fuel volume control solenoid on the high-pressure pump.
Can I drive with P0001?
You can drive short distances but the engine may stall or have reduced power. The vehicle may enter limp mode. Have it diagnosed promptly to avoid being stranded or damaging the high-pressure fuel system.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.