Brake Pressure Sensor Circuit Malfunction
The C0090 code means the vehicle's onboard diagnostic system has detected: Brake Pressure Sensor Circuit Malfunction. This is a critical severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $150 - $600 (parts and labor)
Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS and traction control lights on
- Electronic stability control disabled
- Brake assist not functioning
- Brake warning light on dash
- Hill start assist not working
Probable Causes (Ranked by Likelihood)
- Failed brake pressure sensor Very High
- Corroded brake pressure sensor connector High
- Wiring fault to brake pressure sensor Moderate
- ABS module internal pressure sensor circuit fault Low
Step-by-Step Diagnostic Procedure
-
Scan ABS module for pressure sensor DTCs
-
Read brake pressure sensor data with scan tool during pedal application
-
Check sensor connector for corrosion
-
Test sensor voltage output at various pedal pressures
-
Compare pressure readings to specifications
Frequently Asked Questions
What does the brake pressure sensor measure?
It measures the hydraulic pressure in the brake system, which tells the ABS module how hard the driver is pressing the brake pedal. This information is used for brake assist and stability control.
Where is the brake pressure sensor located?
It is typically mounted on or near the ABS hydraulic unit, connected to the brake lines. Some vehicles integrate it into the master cylinder or the ABS module itself.
Will my brakes still work without this sensor?
Yes, the basic hydraulic braking function will work normally. However, advanced features like brake assist, ABS, and electronic stability control will be disabled.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.