ABS Inlet Valve Solenoid Circuit - Rear Right
The C0014 code means the vehicle's onboard diagnostic system has detected: ABS Inlet Valve Solenoid Circuit - Rear Right. This is a critical severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $400 - $1200 (parts and labor)
Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS warning light on
- Rear right wheel locks during braking
- Uneven braking under ABS activation
- Stability control warning light
Probable Causes (Ranked by Likelihood)
- Failed rear right inlet valve solenoid Very High
- Open circuit in solenoid wiring High
- Valve stuck due to brake fluid contamination Moderate
- ABS module internal driver failure Low
Step-by-Step Diagnostic Procedure
-
Read codes and freeze frame data from ABS module
-
Test rear right inlet solenoid resistance
-
Inspect solenoid wiring for breaks or shorts
-
Perform bidirectional solenoid test with scan tool
Frequently Asked Questions
What is the rear right inlet valve?
A solenoid-controlled valve in the ABS hydraulic unit that regulates brake fluid pressure to the rear right wheel.
How do I know which wheel has the problem?
The diagnostic code specifies the wheel circuit. C0014 identifies the rear right inlet valve.
Can I just disable ABS instead of repairing?
Disabling ABS is not recommended as it is a critical safety system for emergency braking.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.