ABS Inlet Valve Solenoid Circuit - Rear Left
The C0013 code means the vehicle's onboard diagnostic system has detected: ABS Inlet Valve Solenoid Circuit - Rear Left. This is a critical severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $400 - $1200 (parts and labor)
Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS warning light on
- Rear left wheel locks during braking
- Vehicle pulls during ABS activation
- Traction control disabled
Probable Causes (Ranked by Likelihood)
- Failed rear left inlet valve solenoid Very High
- Corroded solenoid wiring connector High
- Contaminated brake fluid blocking valve Moderate
- ABS control module solenoid driver failure Low
Step-by-Step Diagnostic Procedure
-
Scan for codes and note freeze frame conditions
-
Measure rear left inlet solenoid resistance
-
Check solenoid connector for corrosion
-
Command solenoid activation with scan tool
Frequently Asked Questions
Why does only one wheel lock up?
When a single inlet valve fails, only the affected wheel loses ABS control.
Can I replace just one ABS valve?
In most modern vehicles, the inlet valves are part of the integrated ABS hydraulic unit.
Does this affect rear brake performance?
Standard braking is not affected, but the rear left wheel will not have anti-lock protection.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.