Turbo Boost System Performance
The MAXXFORCE-P2263-13 (MaxxForce) diesel fault code means: Turbo Boost System Performance. This is a serious severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- advanced
- Estimated cost
- $700-$6,500
Down with a MaxxForce fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- CEL
- Derate
- Low power
Probable Causes (Ranked by Likelihood)
- Stuck VGT vanes from soot Very Likely
Step-by-Step Diagnostic Procedure
Clean or replace turbo.
Re-calibrate actuator.
Frequently Asked Questions
What is P2263 on a MaxxForce 13 (12.4L)?
P2263 on a MaxxForce 13 (12.4L) (2008-2014) indicates: Turbo Boost System Performance. This is a known fault code on the MaxxForce engine family and typically points to the causes listed above.
Can I drive with P2263 on my MaxxForce?
Only drive short distances to reach a repair facility. Continued operation may cause further damage or progressive derate.
How much does it cost to fix MaxxForce P2263?
Repair cost is typically $700-$6,500 depending on the underlying cause and shop rate. Many MaxxForce faults (especially EGR cooler, head bolt, and VGT repairs) are major expenses that drove fleet owners to repower with Cummins or retire these trucks early.