MAXXFORCE-P1316 serious MaxxForce ›

Injector Driver Module Fault

The MAXXFORCE-P1316 (MaxxForce) diesel fault code means: Injector Driver Module Fault. This is a serious severity code.

My Garage →
Keep driving?
No -- stop driving
DIY difficulty
advanced
Estimated cost
$1,200-$2,800
Mobile mechanic network · I-5 corridor pilot

Down with a MaxxForce fault on the road?

Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.

Find a mobile mechanic →
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Misfire
  • Hard start
  • CEL

Probable Causes (Ranked by Likelihood)

  • Failed injector driver circuit in ECM Likely

Step-by-Step Diagnostic Procedure

  1. Load-test driver circuits with Hickok tester.

  2. Replace ECM / driver module if drivers fail.

Frequently Asked Questions

What is P1316 on a MaxxForce DT (7.6L)?

P1316 on a MaxxForce DT (7.6L) (2007-2015) indicates: Injector Driver Module Fault. This is a known fault code on the MaxxForce engine family and typically points to the causes listed above.

Can I drive with P1316 on my MaxxForce?

No. Stop driving and arrange for towing. Continued operation risks catastrophic damage or stranding.

How much does it cost to fix MaxxForce P1316?

Repair cost is typically $1,200-$2,800 depending on the underlying cause and shop rate. Many MaxxForce faults (especially EGR cooler, head bolt, and VGT repairs) are major expenses that drove fleet owners to repower with Cummins or retire these trucks early.

P1316 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Explore More