Injector Circuit Cylinder 1
The MAXXFORCE-P0201-DT (MaxxForce) diesel fault code means: Injector Circuit Cylinder 1. This is a serious severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- intermediate
- Estimated cost
- $250-$900
Down with a MaxxForce fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Misfire
- Rough idle
- CEL
Probable Causes (Ranked by Likelihood)
- Failed injector coil Likely
- Broken injector harness pin Possible
Step-by-Step Diagnostic Procedure
Ohm injector at ECM connector.
Inspect valve cover injector harness.
Frequently Asked Questions
What is P0201 on a MaxxForce DT (7.6L)?
P0201 on a MaxxForce DT (7.6L) (2007-2015) indicates: Injector Circuit Cylinder 1. This is a known fault code on the MaxxForce engine family and typically points to the causes listed above.
Can I drive with P0201 on my MaxxForce?
Yes, you can generally drive with this code, but diagnose soon to prevent secondary damage.
How much does it cost to fix MaxxForce P0201?
Repair cost is typically $250-$900 depending on the underlying cause and shop rate. Many MaxxForce faults (especially EGR cooler, head bolt, and VGT repairs) are major expenses that drove fleet owners to repower with Cummins or retire these trucks early.