Water in Fuel Sensor Circuit
The KUBOTA-P2264 (Kubota) diesel fault code means: Water in Fuel Sensor Circuit. This is a serious severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- beginner
- Estimated cost
- $0 drain, $80-$200 sensor
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- WIF lamp on
- Long crank possible
Probable Causes (Ranked by Likelihood)
- Water-filled bowl (user didn't drain filter) Very Likely
- Failed WIF sensor Possible
Step-by-Step Diagnostic Procedure
Drain water separator.
Ohm test WIF float circuit.
Frequently Asked Questions
What is Kubota code P2264?
Kubota P2264 means: Water in Fuel Sensor Circuit. Serious code -- address promptly to avoid inducement / further damage.
Can I keep using my Kubota with P2264?
Serious fault -- you can move the machine to a shop but don't run it under load. Use Kubota Diagmaster software (dealer tool) for full diagnostics.
How much does P2264 cost to fix on a Kubota?
Repair cost range: $0 drain, $80-$200 sensor. Compact-tractor labor is typically $110-$150/hr in 2026.
P2264 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown: