KUBOTA-BLINK-2 serious Kubota ›

Kubota D-Series Swirl Chamber Cracked (Glow Plug Blow-Out Symptom)

The KUBOTA-BLINK-2 (Kubota) diesel fault code means: Kubota D-Series Swirl Chamber Cracked (Glow Plug Blow-Out Symptom). This is a serious severity code.

My Garage →
Keep driving?
No -- stop driving
DIY difficulty
advanced
Estimated cost
$400-$900 per chamber + head R&R labor $1,200+
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Ticking / knock noise cold, quiets warm
  • Glow plug repeatedly burns out or blows out of head
  • Start-up white smoke that wouldn't clear

Probable Causes (Ranked by Likelihood)

  • Cracked swirl (pre-chamber) insert -- classic failure on older D902/D1105 indirect-inject Very Likely
  • Over-torqued glow plug crushing pre-cup seat Possible

Step-by-Step Diagnostic Procedure

  1. Borescope through glow plug hole and inspect pre-cup for circumferential cracks.

  2. If cracked, head removal required to install new inserts.

Frequently Asked Questions

What is Kubota code BLINK-2?

Kubota BLINK-2 means: Kubota D-Series Swirl Chamber Cracked (Glow Plug Blow-Out Symptom). Serious code -- address promptly to avoid inducement / further damage.

Can I keep using my Kubota with BLINK-2?

Serious fault -- you can move the machine to a shop but don't run it under load. Use Kubota Diagmaster software (dealer tool) for full diagnostics.

How much does BLINK-2 cost to fix on a Kubota?

Repair cost range: $400-$900 per chamber + head R&R labor $1,200+. Compact-tractor labor is typically $110-$150/hr in 2026.

Explore More