BOBCAT-P0101 moderate Bobcat ›

Mass Air Flow / MAF Sensor Performance

The BOBCAT-P0101 (Bobcat) diesel fault code means: Mass Air Flow / MAF Sensor Performance. This is a moderate severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
beginner
Estimated cost
$20-$350
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Power loss
  • Increased smoke during acceleration
  • Rough idle

Probable Causes (Ranked by Likelihood)

  • Intake leak between MAF and turbo (common on track loaders from vibration) Likely
  • Plugged air cleaner element Likely
  • Contaminated MAF sensor Possible

Step-by-Step Diagnostic Procedure

  1. Inspect charge-air cooler boots and silicone couplers for splits.

  2. Service Bobcat air cleaner per daily walk-around spec.

  3. Clean MAF with CRC MAF-safe cleaner only, never rag.

Frequently Asked Questions

What is Bobcat code P0101?

Bobcat P0101: Mass Air Flow / MAF Sensor Performance. This code is reported on Bobcat equipment running the described engine family.

Can I keep working with Bobcat code P0101?

Usually drivable short-term, but fix soon to avoid derate or DPF issues.

How much does Bobcat P0101 cost to fix?

Typical repair cost: $20-$350. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Bobcat Service Analyzer) is usually required.

P0101 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Explore More