Bobcat Drive Motor Fault - Right Hydrostatic
The BOBCAT-M1213 (Bobcat) diesel fault code means: Bobcat Drive Motor Fault - Right Hydrostatic. This is a serious severity code.
- Keep driving?
- No -- stop driving
- DIY difficulty
- advanced
- Estimated cost
- $400-$4,500
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Machine pulls to one side under drive
- Slow or no response on right side
Probable Causes (Ranked by Likelihood)
- Hydrostatic drive motor wear / internal leak Likely
- Failed drive solenoid Possible
Step-by-Step Diagnostic Procedure
Swap solenoids side-to-side to see if fault follows.
Charge pressure test at test port.
Case-drain flow test.
Frequently Asked Questions
What is Bobcat code M1213?
Bobcat M1213: Bobcat Drive Motor Fault - Right Hydrostatic. This code is reported on Bobcat equipment running the described engine family.
Can I keep working with Bobcat code M1213?
Do not continue operating. Risk of engine damage or unsafe shutdown.
How much does Bobcat M1213 cost to fix?
Typical repair cost: $400-$4,500. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Bobcat Service Analyzer) is usually required.