Bobcat Operator Display Code 03 - Engine Coolant Temperature High
The BOBCAT-CODE-03 (Bobcat) diesel fault code means: Bobcat Operator Display Code 03 - Engine Coolant Temperature High. This is a critical severity code.
- Keep driving?
- No -- stop driving
- DIY difficulty
- intermediate
- Estimated cost
- $0-$2,500 depending on sub-system
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Overheat lamp, shutdown timer
Probable Causes (Ranked by Likelihood)
- See specific cluster advice for this code family Varies
- Harness / sensor fault in affected system Likely
Step-by-Step Diagnostic Procedure
Refer to Bobcat Operation & Maintenance Manual code list.
Clean radiator, check fan drive, check coolant.
If persistent, connect Bobcat Service Analyzer for full SPN/FMI.
Frequently Asked Questions
What is Bobcat code CODE-03?
Bobcat CODE-03: Bobcat Operator Display Code 03 - Engine Coolant Temperature High. This code is reported on Bobcat equipment running the described engine family.
Can I keep working with Bobcat code CODE-03?
Do not continue operating. Risk of engine damage or unsafe shutdown.
How much does Bobcat CODE-03 cost to fix?
Typical repair cost: $0-$2,500 depending on sub-system. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Bobcat Service Analyzer) is usually required.