P2589 serious

Turbocharger Wastegate Position Sensor Circuit High

The P2589 code means the vehicle's onboard diagnostic system has detected: Turbocharger Wastegate Position Sensor Circuit High. This is a serious severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
hard
Estimated cost
$250 - $700 (parts and labor)
ANCEL AD310 OBD-II Scanner
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon
AstroAI Digital Multimeter
Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate links — we earn a commission at no extra cost to you.

What Are the Symptoms of P2589?

  • Check Engine Light on
  • False wastegate position reading
  • Erratic boost control
  • Engine power reduced
  • Possible overboost protection activated

What Causes P2589? (Most Likely First)

  • Short to voltage in wastegate position sensor circuit Very High
  • Defective wastegate position sensor High
  • Heat-damaged wiring near turbo/exhaust Moderate
  • PCM input circuit fault Low

Can I Still Drive with P2589?

Short distances only. P2589 is rated serious severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.

Frequently Asked Questions

What does P2589 mean?

P2589 indicates a problem with the turbocharger wastegate position sensor circuit high. The PCM has detected an issue that may affect turbocharger boost control and engine performance.

Can I drive with a P2589 code?

You can drive short distances, but expect reduced power and possible limp mode. Have it repaired soon to prevent turbo damage.

How much does it cost to fix P2589?

Repairs typically cost $250 - $700, depending on whether the issue is sensor, wiring, or actuator related.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose P2589?

  1. Read freeze frame data and confirm P2589 is stored

  2. Measure wastegate position sensor signal voltage

  3. Inspect wiring near exhaust manifold for heat damage

  4. Disconnect sensor and verify voltage drops

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)

Which Vehicles Commonly Get P2589?

  • 2011-2020 Ford F-150 3.5L EcoBoost
  • 2013-2019 BMW 435i 3.0L Turbo
  • 2012-2018 Audi A6 3.0T
  • 2014-2020 Volkswagen Atlas 2.0T

Explore More

Was this helpful?

Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.