Turbocharger Boost Control Position Sensor Circuit
The P2563 code means the vehicle's onboard diagnostic system has detected: Turbocharger Boost Control Position Sensor Circuit. This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $300 - $800 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of P2563?
- Check Engine Light on
- Reduced turbo boost and power
- Engine enters limp mode
- Poor acceleration response
- Turbo may not engage at all
What Causes P2563? (Most Likely First)
- Faulty turbocharger boost control position sensor Very High
- Damaged wiring or connector to boost sensor High
- Turbocharger actuator failure Moderate
- PCM/ECM software issue Low
Can I Still Drive with P2563?
Short distances only. P2563 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What does P2563 mean?
P2563 indicates a malfunction in the turbocharger boost control position sensor circuit, meaning the PCM cannot properly monitor or control boost pressure.
Can I drive with a P2563 code?
You can drive short distances at reduced power. The engine will likely be in limp mode with limited boost. Have it repaired soon to avoid further damage.
How much does it cost to fix P2563?
Repairs typically range from $300 to $800 depending on whether the sensor, wiring, or turbo actuator needs replacement.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose P2563?
-
Read freeze frame data and confirm P2563 is present
-
Check boost control position sensor voltage with scan tool
-
Inspect wiring and connector to the turbo boost position sensor
-
Test turbocharger actuator movement and range
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
- Cross-checked against the SAE J2012:2002 DTC table (2026-08-27)archived scan of the SAE standard — readable copy, not SAE’s current edition
Which Vehicles Commonly Get P2563?
- 2011-2020 Ford F-150 3.5L EcoBoost
- 2013-2020 Ford Escape 1.5L/2.0L EcoBoost
- 2012-2019 Volkswagen Jetta 1.4T
- 2010-2018 Audi A4 2.0T
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.