P2439 low
EVAP Leak Detection Pump Circuit Low
Can I Drive?
Yes, But Fix Soon
DIY Difficulty
moderate
Estimated Cost
$100 - $400 (parts and labor)
What does P2439 mean?
The P2439 code means the vehicle's onboard diagnostic system has detected: EVAP Leak Detection Pump Circuit Low. This is a low severity code.
Advertisement
Common Symptoms
- Check Engine Light on
- EVAP leak test fails
- Gas cap warning light on
- Slight fuel odor
- Failed emissions test
Probable Causes (Ranked by Likelihood)
- Short to ground in LDP circuit Very High
- Corroded LDP connector High
- Damaged LDP wiring Moderate
- ECM LDP driver fault Low
Step-by-Step Diagnostic Procedure
-
Test EVAP leak detection pump operation with scan tool
-
Inspect LDP wiring and connector
-
Check LDP pump for mechanical operation
-
Verify ECM command to LDP
Advertisement
Frequently Asked Questions
What does P2439 mean?
P2439 indicates: EVAP Leak Detection Pump Circuit Low. The ECM detected an issue that needs diagnosis and repair.
Is P2439 urgent?
EVAP codes should be repaired but are not usually urgent unless you have an upcoming emissions test.
What should I check first?
Start with a visual inspection of the sensor wiring and connector. Use a scan tool to read live data. For DPF codes, check soot loading level. For EVAP codes, check the gas cap first.