P2358 serious

Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A

The P2358 code means the vehicle's onboard diagnostic system has detected: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A. This is a serious severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
hard
Estimated cost
$300 - $1,200 (parts and labor)
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light on
  • Engine may crank longer before starting
  • Rough or unstable idle
  • Noticeable loss of power
  • Engine may stall unexpectedly

Probable Causes (Ranked by Likelihood)

  • Stretched or jumped timing chain/belt Very High
  • Faulty camshaft position sensor (Bank 2 Sensor A) High
  • Worn timing chain tensioner or guide Moderate
  • Crankshaft position sensor failure Low

Step-by-Step Diagnostic Procedure

  1. Scan for P2358 and check for related timing codes

  2. Compare crankshaft and camshaft position signals on an oscilloscope

  3. Inspect timing chain/belt tension and alignment marks

  4. Check camshaft position sensor (Bank 2 Sensor A) resistance and output

Frequently Asked Questions

What does P2358 mean?

P2358 means the PCM detected that the crankshaft and camshaft positions are not synchronized on Bank 2 Sensor A. This often points to a timing chain or belt issue.

Can I drive with P2358?

Drive only short distances to a repair shop. A timing correlation error can indicate a stretched or jumped timing chain, which may cause engine damage if ignored.

How much does it cost to fix P2358?

Costs range from $300 for a sensor replacement to $1,200+ for timing chain/belt replacement with tensioners and guides.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.