P2353 moderate

Intake Manifold Runner Control Position Sensor/Switch Circuit Low

The P2353 code means the vehicle's onboard diagnostic system has detected: Intake Manifold Runner Control Position Sensor/Switch Circuit Low. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
moderate
Estimated cost
$200 - $500 (parts and labor)
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light on
  • Reduced engine power at higher RPMs
  • Rough idle or slight hesitation
  • Whistling or vacuum leak sound from intake area
  • Decreased fuel efficiency

Probable Causes (Ranked by Likelihood)

  • Short to ground in runner control circuit wiring Very High
  • Faulty intake manifold runner control solenoid High
  • Corroded connector at the runner control actuator Moderate
  • PCM driver circuit failure Low

Step-by-Step Diagnostic Procedure

  1. Read and document freeze frame data for P2353

  2. Inspect intake manifold runner flaps for free movement and carbon buildup

  3. Test runner control actuator operation with a scan tool bi-directional test

  4. Check wiring continuity and connector condition for the runner control circuit

Frequently Asked Questions

What does P2353 mean?

P2353 indicates a problem with the intake manifold runner control system: Intake Manifold Runner Control Position Sensor/Switch Circuit Low. This system optimizes airflow into the engine at different RPM ranges.

Can I drive with P2353?

You can drive short distances. The engine may feel less responsive at certain RPMs but is generally safe for short trips. Schedule a repair to restore full performance.

How much does it cost to fix P2353?

Repair costs range from $200 to $500 depending on whether the actuator, sensor, or manifold runner assembly needs replacement.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More

Search codes Vehicle-specific fixes Guides By make

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.

Browse by symptom → Read repair guides → Fixes by vehicle →