Injector Control Pressure Erratic
The P2292 code means the vehicle's onboard diagnostic system has detected: Injector Control Pressure Erratic. This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $150 - $1200 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of P2292?
- Engine surging at idle
- Inconsistent power delivery
- Check Engine Light illuminated
- Rough idle that comes and goes
- Stalling at low RPM
What Causes P2292? (Most Likely First)
- ICP sensor intermittent failure Very High
- IPR valve sticking intermittently High
- High-pressure oil leak that varies with temperature Moderate
- Damaged ICP sensor wiring or connector Moderate
Can I Still Drive with P2292?
Short distances only. P2292 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
Can I drive with code P2292?
Short distances only. Erratic pressure can cause stalling without warning. Avoid heavy loads and highway driving until repaired.
What causes P2292?
Commonly an ICP sensor that is failing intermittently or has oil contamination in its connector from a blown internal diaphragm.
Is P2292 expensive to fix?
Costs range from $150 for an ICP sensor to $1200 for IPR valve and high-pressure oil system repairs. Start with the sensor as it is the most common fix.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose P2292?
-
Monitor ICP sensor readings for erratic pressure swings
-
Check ICP sensor connector for oil contamination (blown sensor diaphragm)
-
Inspect ICP sensor wiring for chafing or damage
-
Test IPR valve duty cycle response with a scan tool
-
Compare ICP readings at cold start versus hot restart
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Which Vehicles Commonly Get P2292?
- 2003-2010 Ford F-250 6.0L Powerstroke
- 2008-2016 Ford F-350 6.4L Powerstroke
- 2003-2007 Ford E-Series 6.0L Diesel
- 2004-2010 Ford F-450 6.0L Powerstroke
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.