P2227 low

Barometric Pressure Sensor Circuit Intermittent

The P2227 code means the vehicle's onboard diagnostic system has detected: Barometric Pressure Sensor Circuit Intermittent. This is a low severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
moderate
Estimated cost
$30 - $250 (parts and labor)
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Intermittent Check Engine Light
  • Occasional hesitation
  • Sporadic fuel economy changes
  • Intermittent rough running
  • Random performance fluctuations

Probable Causes (Ranked by Likelihood)

  • Loose barometric pressure sensor connector Very High
  • Partially broken wire in the sensor circuit High
  • Corroded connector pins Moderate
  • Sensor beginning to fail intermittently Moderate
  • Vibration-induced connection issues Low

Step-by-Step Diagnostic Procedure

  1. Wiggle test the barometric pressure sensor connector while watching live data

  2. Inspect the wiring harness for chafing or partial breaks

  3. Clean connector pins and apply dielectric grease

  4. Monitor sensor readings during a road test for erratic behavior

  5. Replace the sensor if wiring is confirmed good

Frequently Asked Questions

Why does P2227 come and go?

Intermittent codes typically indicate a connection problem -- a loose connector, corroded pin, or damaged wire that only fails under certain conditions like vibration or temperature changes.

Can vibration cause intermittent barometric sensor codes?

Yes, engine vibration or road vibration can cause a loose connector to intermittently lose contact, resulting in sporadic sensor reading dropouts.

Should I replace the sensor for an intermittent code?

Check the wiring and connections first. Many intermittent codes are resolved by cleaning connectors and repairing wiring, which is much cheaper than replacing the sensor.

Sources

This page is built from documented references. Verify against your own service info before repair work.

P2227 on Diesel, EV & Equipment

The same code ID appears across other engines and platforms. The diagnostic flow varies by manufacturer — these are the platform-specific breakdowns:

Explore More

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.