P2223 low

Intake Air Quality Sensor Circuit High (Bank 1)

The P2223 code means the vehicle's onboard diagnostic system has detected: Intake Air Quality Sensor Circuit High (Bank 1). This is a low severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
moderate
Estimated cost
$50 - $250 (parts and labor)
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light on
  • No major drivability symptoms
  • Possible minor performance variation
  • Emissions test failure
  • High sensor reading on scan tool

Probable Causes (Ranked by Likelihood)

  • Short to voltage in the sensor wiring Very High
  • Failed sensor producing high signal output High
  • Water intrusion in the sensor connector Moderate
  • Damaged wiring near heat source Moderate
  • ECM internal circuit fault Low

Step-by-Step Diagnostic Procedure

  1. Read the air quality sensor value -- check if pegged at maximum voltage

  2. Inspect wiring for shorts to power or heat damage

  3. Check the connector for water intrusion or pin damage

  4. Disconnect the sensor and verify signal drops

  5. Replace the sensor if wiring checks are normal

Frequently Asked Questions

What causes a high circuit reading?

A high circuit reading means the sensor is sending a voltage above the maximum expected threshold, usually from a short to power in the wiring or an internal sensor failure.

Can moisture cause P2223?

Yes, water intrusion into the sensor connector can create a path that raises the signal voltage, triggering a high circuit code.

Is P2223 urgent?

No, P2223 is a low-severity code that does not typically affect drivability. However, it should be repaired to pass emissions testing and ensure accurate air quality monitoring.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.