P2153 moderate

Throttle/Pedal Position Sensor/Switch C Circuit

The P2153 code means the vehicle's onboard diagnostic system has detected: Throttle/Pedal Position Sensor/Switch C Circuit. This is a moderate severity code.

My Garage →

Keep driving?: Short distances only
DIY difficulty: moderate
Estimated cost: $80 - $400 (parts and labor)

Recommended Tool

ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This

AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

Check Engine Light on
Erratic throttle response
Engine may enter limp mode
Reduced power warning
Poor acceleration response

Probable Causes (Ranked by Likelihood)

Failed throttle position sensor C Very High
Wiring fault to TPS C High
Connector issue at TPS C Moderate
ECM input fault Low

Step-by-Step Diagnostic Procedure

Read TPS C data on scan tool
Inspect TPS C wiring
Measure TPS C reference voltage
Sweep throttle and monitor TPS C for dropouts

Frequently Asked Questions

What does P2153 mean?

P2153 indicates: Throttle/Pedal Position Sensor/Switch C Circuit. The ECM detected an abnormal condition in this sensor circuit.

Is P2153 serious?

Moderate. The vehicle may enter limp mode. Repair promptly.

What should I check first?

Start with a visual inspection of the sensor wiring and connector. Use a scan tool to read sensor data and compare to expected values. Check reference voltage (typically 5V) at the sensor connector.