Exhaust Gas Temperature Sensor Circuit (Bank 1 Sensor 2)
The P2034 code means the vehicle's onboard diagnostic system has detected: Exhaust Gas Temperature Sensor Circuit (Bank 1 Sensor 2). This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- moderate
- Estimated cost
- $150 - $400 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- DPF regeneration issues
- Reduced engine power
- Higher fuel consumption
- Turbo protection mode may activate
Probable Causes (Ranked by Likelihood)
- Faulty Bank 1 Sensor 2 EGT sensor Very High
- Damaged sensor wiring due to exhaust heat High
- Corroded sensor connector Moderate
- Exhaust leak near sensor Moderate
- PCM circuit fault Low
Step-by-Step Diagnostic Procedure
-
Read freeze frame data and confirm P2034
-
Monitor Sensor 2 EGT reading and compare to Sensor 1
-
Inspect sensor wiring and connector for heat damage
-
Test sensor resistance at known temperature
Frequently Asked Questions
What does P2034 mean?
P2034 indicates a fault in the Bank 1 Sensor 2 exhaust gas temperature sensor circuit, which typically monitors temperature after the turbo or before the DPF.
Can I drive with a P2034 code?
Short-distance driving is safe, but DPF management may be compromised on diesel vehicles.
How much does it cost to fix P2034?
Expect $150 to $400, primarily for sensor replacement and labor to access the sensor location.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.