Driver Display Serial Communication Circuit
The P0644 code means the vehicle's onboard diagnostic system has detected: Driver Display Serial Communication Circuit. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $50 - $500 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of P0644?
- Check Engine Light on
- Instrument cluster communication error
- Reduced system performance
- Warning indicators on dashboard
What Causes P0644? (Most Likely First)
- Faulty serial data bus between ECM and display Very High
- Wiring damage or corrosion in the circuit High
- Poor electrical connection at module or component Moderate
- ECM or control module internal failure Low
Can I Still Drive with P0644?
Yes, but fix soon. P0644 is rated low severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring the light.
Frequently Asked Questions
What does P0644 mean?
P0644 indicates a fault in the driver display serial communication circuit. This is an electronic control system code that affects the ECM's ability to manage the associated component or system.
Is P0644 a serious code?
This is a low-priority code that does not typically affect drivability but should be diagnosed when convenient.
Can a low battery cause ECM-related codes?
Yes. Low battery voltage can cause various ECM and module communication codes. Always verify the battery is fully charged and the charging system is working before diagnosing electronic control module codes.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose P0644?
-
Use a scan tool to read data related to Driver Display Serial Communication
-
Inspect all related wiring, connectors, and grounds for damage, corrosion, or loose connections
-
Measure circuit voltage, resistance, and continuity to identify the fault type
-
Check for technical service bulletins related to this code for your specific vehicle
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Which Vehicles Commonly Get P0644?
- 2008-2018 Ford F-150
- 2010-2020 Toyota Camry
- 2009-2019 Honda Accord
- 2011-2020 Chevrolet Silverado
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.