P0319 low

Rough Road Hardware Not Present

The P0319 code means the vehicle's onboard diagnostic system has detected: Rough Road Hardware Not Present. This is a low severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
hard
Estimated cost
$100 - $400 (parts and labor)
Recommended Tool
ANCEL AD310 OBD-II Scanner

Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Every Tech Needs This
AstroAI Digital Multimeter

Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Check Engine Light on
  • Misfire detection may be inaccurate
  • False misfire codes may appear
  • No noticeable drivability issues

Probable Causes (Ranked by Likelihood)

  • Missing or non-functional rough road sensor Very High
  • Disconnected wheel speed sensor used for rough road detection High
  • ECM calibration mismatch with vehicle hardware Moderate
  • Aftermarket suspension modification affecting sensor signal Moderate

Step-by-Step Diagnostic Procedure

  1. Check for any disconnected wheel speed sensors or ABS sensors

  2. Verify all four wheel speed sensors are communicating properly via scan tool data

  3. Check for aftermarket suspension modifications that may have disturbed sensor wiring

  4. Review technical service bulletins for your vehicle regarding rough road detection calibration

Frequently Asked Questions

What is rough road detection?

Rough road detection uses wheel speed sensors or a dedicated sensor to detect when the vehicle is on rough terrain. This allows the ECM to distinguish between actual engine misfires and crankshaft speed variations caused by road conditions.

Is P0319 a serious code?

P0319 is not typically a serious drivability concern. However, without rough road detection, the ECM may set false misfire codes when driving on rough terrain, which can be misleading during diagnosis.

Can aftermarket wheels cause P0319?

Aftermarket wheels with different specifications can affect wheel speed sensor air gaps, potentially disrupting the rough road detection system. If P0319 appeared after a wheel or suspension change, inspect sensor clearances.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.