Heated Oxygen Sensor Heater Control Circuit High (Bank 2, Sensor 3)
The P0064 code means the vehicle's onboard diagnostic system has detected: Heated Oxygen Sensor Heater Control Circuit High (Bank 2, Sensor 3). This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $100 - $300 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Check Engine Light on
- Minor fuel economy impact
- No noticeable drivability symptoms
- Emissions inspection failure
Probable Causes (Ranked by Likelihood)
- Short circuit in O2 sensor heater wiring Very High
- Internally shorted heater element High
- Water intrusion in sensor connector Moderate
- ECM heater driver issue Low
Step-by-Step Diagnostic Procedure
-
Confirm P0064 with scan tool
-
Inspect Bank 2 Sensor 3 wiring for short circuits
-
Measure heater element resistance
-
Check connector for moisture or corrosion
Frequently Asked Questions
What does P0064 mean?
P0064 indicates a high voltage condition in the heater circuit of Bank 2 Sensor 3, usually due to a short in the wiring or sensor.
Can P0064 cause other problems?
P0064 by itself does not cause significant problems beyond emissions issues. However, a short circuit could potentially blow a fuse affecting other sensors.
What is the fix for P0064?
Repair the short circuit in the wiring or replace the O2 sensor. Also check for water intrusion at the connector.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.