Fuel Shutoff Valve "A" Control Circuit/Open
The P0005 code means the vehicle's onboard diagnostic system has detected: Fuel Shutoff Valve "A" Control Circuit/Open. This is a critical severity code.
- Keep driving?
- No — stop driving
- DIY difficulty
- hard
- Estimated cost
- $200 - $700 (parts and labor)
Best-selling code reader on Amazon. Reads and clears check engine codes on any 1996+ vehicle. Under $30.
Essential for diagnosing sensor codes, checking voltage, and testing circuits. Under $15 and pays for itself on the first job.
Affiliate links — we earn a commission at no extra cost to you.
What Are the Symptoms of P0005?
- Engine will not start
- Engine stalls and will not restart
- Check Engine Light on
- Fuel shutoff warning indicator
What Causes P0005? (Most Likely First)
- Open circuit in fuel shutoff valve wiring Very High
- Failed fuel shutoff valve solenoid High
- Disconnected or corroded connector at shutoff valve Moderate
- Blown fuse in fuel shutoff circuit Moderate
Can I Still Drive with P0005?
No — stop driving. P0005 is rated critical severity. Continuing to drive in this state risks further damage — get it looked at before your next trip.
Frequently Asked Questions
What is a fuel shutoff valve?
The fuel shutoff valve is a safety device that cuts fuel supply to the engine. It is commonly used on diesel engines to shut down the engine since diesels do not have a throttle to cut airflow. When this valve fails open-circuit, the ECM cannot control fuel delivery.
Why will my engine not start with P0005?
If the fuel shutoff valve cannot be energized due to an open circuit, it remains in its default closed position, blocking fuel to the engine. Without fuel, the engine will crank but not start.
Can a blown fuse cause P0005?
Yes. A blown fuse in the fuel shutoff valve circuit will cause an open circuit condition. Check the fuse box for the fuel system fuses before replacing more expensive components.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose P0005?
-
Check all fuses related to the fuel system and fuel shutoff valve circuit
-
Inspect the fuel shutoff valve connector for corrosion, backed-out pins, or physical damage
-
Measure resistance across the fuel shutoff valve solenoid; an open reading confirms a failed valve
-
Trace wiring from ECM to shutoff valve checking for breaks, especially at flex points and connectors
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J2012Diagnostic Trouble Code Definitions (defines the generic OBD-II code ranges)
Which Vehicles Commonly Get P0005?
- 2008-2018 Ford F-250 Super Duty 6.7L
- 2010-2020 Ram 2500 6.7L Cummins
- 2011-2019 Chevrolet Silverado 2500HD Duramax
- 2012-2020 Ford Transit 3.2L Diesel
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.