ABS Valve Relay Circuit High
The C0113 code means the vehicle's onboard diagnostic system has detected: ABS Valve Relay Circuit High. This is a critical severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- moderate
- Estimated cost
- $50 - $300 (parts and labor)
Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS warning light on
- ABS valves inoperative
- Traction control malfunction
- ABS does not activate during braking
Probable Causes (Ranked by Likelihood)
- Failed ABS valve relay Very High
- Corroded relay connector High
- Open or shorted relay wiring Moderate
- ABS module valve relay driver failure Low
Step-by-Step Diagnostic Procedure
-
Locate and test ABS valve relay
-
Swap relay with known good one
-
Check relay circuit wiring integrity
-
Measure relay coil resistance
Frequently Asked Questions
What does code C0113 mean?
C0113 indicates a fault in the valve relay circuit high that affects ABS and related safety systems.
Can I drive with C0113?
You can drive short distances, but ABS and stability control may be affected.
How much does it cost to fix C0113?
Typical repair costs range from $50 - $300 including parts and labor.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.