ABS Pump Motor Running Too Long
The C0010 code means the vehicle's onboard diagnostic system has detected: ABS Pump Motor Running Too Long. This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $300 - $1400 (parts and labor)
Basic scanners cannot read ABS codes. BlueDriver reads all systems including ABS, SRS, and transmission through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Basic scanners cannot read ABS codes. This one reads all four systems so you know exactly which sensor failed.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS warning light on
- ABS pump runs for extended periods
- Reduced ABS performance
- Traction control warning light
Probable Causes (Ranked by Likelihood)
- Internal hydraulic leak in ABS unit Very High
- Worn ABS pump motor High
- Air in the ABS hydraulic system Moderate
- Faulty ABS pressure sensor Low
Step-by-Step Diagnostic Procedure
-
Monitor ABS pump run time using scan tool data
-
Check brake fluid level at the master cylinder
-
Inspect ABS hydraulic unit for external leaks
-
Bleed the ABS system to remove trapped air
Frequently Asked Questions
Why does my ABS pump run so long?
Extended pump operation usually means the pump cannot build or maintain adequate pressure due to a leak or air in the system.
Is extended pump operation dangerous?
The brakes still function, but the motor can overheat. Have the system inspected to prevent further damage.
Can air in the brake lines cause this?
Yes, trapped air prevents proper pressure buildup, causing the pump to run longer than normal.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.