Yanmar Marine High Bilge Water Alarm
The YANMAR-MARINE-BILGE-WATER (Yanmar) diesel fault code means: Yanmar Marine High Bilge Water Alarm. This is a critical severity code.
- Keep driving?
- No — stop driving
- DIY difficulty
- intermediate
- Estimated cost
- $20-$2,500
What Are the Symptoms of YANMAR-MARINE-BILGE-WATER?
- Bilge alarm / buzzer
- Visible water rising in bilge
What Causes YANMAR-MARINE-BILGE-WATER? (Most Likely First)
- Failed raw water hose clamp or hose Likely
- Leaking seacock / shaft seal / packing gland Likely
- Heat exchanger end cap leak Possible
Can I Still Drive with YANMAR-MARINE-BILGE-WATER?
No — stop driving. YANMAR-MARINE-BILGE-WATER is rated critical severity. Continuing to drive in this state risks further damage — get it looked at before your next trip.
Frequently Asked Questions
What is Yanmar code MARINE-BILGE?
Yanmar MARINE-BILGE: Yanmar Marine High Bilge Water Alarm.
Can I keep operating with Yanmar code MARINE-BILGE?
Do not operate. Risk of engine damage.
How much does Yanmar MARINE-BILGE cost to fix?
Typical cost: $20-$2,500. Yanmar SmartAssist / YDT diagnostic software is often required.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose YANMAR-MARINE-BILGE-WATER?
SAFETY: locate source of water intrusion immediately.
Check raw water plumbing at engine for seep stains or active leak.
Inspect shaft packing / dripless seal bellows.
Which Vehicles Commonly Get YANMAR-MARINE-BILGE-WATER?
- Hunter / Beneteau / Catalina sailboats with Yanmar 3JH / 4JH
- Trawlers with Yanmar 6LY / 6LF series
- Yachts with Yanmar 8LV / 6LY400 common-rail marine diesels
- Workboats with Yanmar 4LV / 4JH series marine propulsion
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.