Yanmar Genset Low Fuel / Shutdown
The YANMAR-GENSET-LOW-FUEL (Yanmar) diesel fault code means: Yanmar Genset Low Fuel / Shutdown. This is a serious severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- beginner
- Estimated cost
- $0-$150
A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Genset will not restart
- Low fuel lamp
Probable Causes (Ranked by Likelihood)
- Fuel tank empty or low (float stuck) Very Likely
- Air in fuel after run-out Likely
Step-by-Step Diagnostic Procedure
Refill fuel.
Bleed fuel system through priming pump.
Reset controller, restart.
Frequently Asked Questions
What is Yanmar code GENSET-FUEL?
Yanmar GENSET-FUEL: Yanmar Genset Low Fuel / Shutdown. This code is reported on Yanmar equipment running the described engine family.
Can I keep working with Yanmar code GENSET-FUEL?
Usually drivable short-term, but fix soon to avoid derate or DPF issues.
How much does Yanmar GENSET-FUEL cost to fix?
Typical repair cost: $0-$150. Off-road diesel shop labor runs $125-$175/hr in 2026. Dealer diagnostic software (Yanmar SmartAssist / YDT) is usually required.