POWERSTROKE-P2610-64 moderate Power Stroke ›

PCM Internal Timer Fault

The POWERSTROKE-P2610-64 (Power Stroke) diesel fault code means: PCM Internal Timer Fault. This is a moderate severity code.

Unverified. We could not confirm this code's definition against freely available manufacturer documentation, so treat the meaning, severity and fix guidance on this page as unconfirmed. Check it against the manufacturer's service information for your exact model and serial range before acting on it. This page is kept out of search engines for that reason, and we are working through this family manual by manual.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
advanced
Estimated cost
$50-$900
Mobile mechanic network · I-5 corridor pilot

Down with a Power Stroke fault on the road?

We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.

View pilot availability →

What Are the Symptoms of POWERSTROKE-P2610-64?

  • CEL

What Causes POWERSTROKE-P2610-64? (Most Likely First)

  • PCM fault Likely

Can I Still Drive with POWERSTROKE-P2610-64?

Yes, but fix soon. POWERSTROKE-P2610-64 is rated moderate severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring it.

Frequently Asked Questions

What is P2610 on a 6.4L Power Stroke?

P2610 on a 6.4L Power Stroke (2008-2010) indicates: PCM Internal Timer Fault. This is a known diagnostic trouble code on this engine family and typically points to the causes listed above.

Can I drive with P2610 on my Power Stroke?

Yes, you can generally drive with this code, but diagnose it soon to prevent further damage.

How much does it cost to fix P2610?

Repair cost is typically $50-$900 depending on the underlying cause and whether you DIY or use a shop. Diagnostic time alone runs $100-$180 at most independent diesel shops.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose POWERSTROKE-P2610-64?

  1. Reprogram or replace PCM.

Which Vehicles Commonly Get POWERSTROKE-P2610-64?

  • 2008-2010 Ford F-250 Super Duty 6.4L Power Stroke
  • 2008-2010 Ford F-350 Super Duty 6.4L Power Stroke
  • 2008-2010 Ford F-450/F-550 Super Duty 6.4L Power Stroke

Explore More

More Power Stroke codes → Diesel home All diesel codes Heavy-duty Guides

Was this helpful?

Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.