POWERSTROKE-P2010 moderate Power Stroke ›

Intake Manifold Tuning Valve Control Circuit/Open

The POWERSTROKE-P2010 (Power Stroke) diesel fault code means: Intake Manifold Tuning Valve Control Circuit/Open. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
intermediate
Estimated cost
$200-$600
Mobile mechanic network · I-5 corridor pilot

Down with a Power Stroke fault on the road?

We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.

View pilot availability →

What Are the Symptoms of POWERSTROKE-P2010?

  • CEL

What Causes POWERSTROKE-P2010? (Most Likely First)

  • Failed IMRC motor Likely
  • Open harness Likely

Can I Still Drive with POWERSTROKE-P2010?

Short distances only. POWERSTROKE-P2010 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.

Frequently Asked Questions

What is P2010 on a 6.4L Power Stroke?

P2010 on a 6.4L Power Stroke (2008-2010) indicates: Intake Manifold Tuning Valve Control Circuit/Open. This is a known diagnostic trouble code on this engine family and typically points to the causes listed above.

Can I drive with P2010 on my Power Stroke?

Only drive short distances to get to a repair facility. Continued operation may cause further damage.

How much does it cost to fix P2010?

Repair cost is typically $200-$600 depending on the underlying cause and whether you DIY or use a shop. Diagnostic time alone runs $100-$180 at most independent diesel shops.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose POWERSTROKE-P2010?

  1. Test motor resistance.

  2. Replace.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines P2010 as a generic OBD-II code)

P2010 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Gas / Automotive (OBD-II) Generic OBD-II definition for P2010

Which Vehicles Commonly Get POWERSTROKE-P2010?

  • 2008-2010 Ford F-250 Super Duty 6.4L Power Stroke
  • 2008-2010 Ford F-350 Super Duty 6.4L Power Stroke
  • 2008-2010 Ford F-450/F-550 Super Duty 6.4L Power Stroke

Explore More

More Power Stroke codes → Diesel home All diesel codes Heavy-duty Guides

Was this helpful?

Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.