POWERSTROKE-P0612 serious Power Stroke ›

FICM Relay Control Circuit

The POWERSTROKE-P0612 (Power Stroke) diesel fault code means: FICM Relay Control Circuit. This is a serious severity code.

My Garage →
Keep driving?
No -- stop driving
DIY difficulty
intermediate
Estimated cost
$50-$400
Mobile mechanic network · I-5 corridor pilot

Down with a Power Stroke fault on the road?

Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.

Find a mobile mechanic →
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • No start
  • Intermittent start
  • CEL

Probable Causes (Ranked by Likelihood)

  • Failed FICM relay Likely
  • Open wiring in relay control circuit Likely
  • PCM driver failure Possible

Step-by-Step Diagnostic Procedure

  1. Swap FICM relay with known good.

  2. Check wiring between PCM and relay.

Frequently Asked Questions

What is P0612 on a 6.0L Power Stroke?

P0612 on a 6.0L Power Stroke (2003-2007) indicates: FICM Relay Control Circuit. This is a known diagnostic trouble code on this engine family and typically points to the causes listed above.

Can I drive with P0612 on my Power Stroke?

No. Stop driving and arrange for towing. Continued operation risks serious engine or emissions system damage.

How much does it cost to fix P0612?

Repair cost is typically $50-$400 depending on the underlying cause and whether you DIY or use a shop. Diagnostic time alone runs $100-$180 at most independent diesel shops.

P0612 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Explore More