POWERSTROKE-P0341 moderate Power Stroke ›

Camshaft Position Sensor Circuit Range/Performance

The POWERSTROKE-P0341 (Power Stroke) diesel fault code means: Camshaft Position Sensor Circuit Range/Performance. This is a moderate severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
intermediate
Estimated cost
$80-$250
Mobile mechanic network · I-5 corridor pilot

Down with a Power Stroke fault on the road?

We are building a network of verified mobile diesel and reefer technicians along the freight corridor. It is not live yet — no one can be dispatched to you today. You can see where the pilot is launching and register interest.

View pilot availability →

What Are the Symptoms of POWERSTROKE-P0341?

  • Hard to start when warm
  • Occasional stall restarts fine
  • CEL
  • Hesitation or bucking under load

What Causes POWERSTROKE-P0341? (Most Likely First)

  • Intermittent 7.3L CMP sensor failure (classic symptom) Very Likely
  • Loose or corroded CMP connector Likely
  • Damaged reluctor wheel inside front cover Possible

Can I Still Drive with POWERSTROKE-P0341?

Yes, but fix soon. POWERSTROKE-P0341 is rated moderate severity. It is not an immediate stop-driving fault, but it will not clear itself — book the repair rather than ignoring it.

Frequently Asked Questions

What is P0341 on a 7.3L Power Stroke?

P0341 on a 7.3L Power Stroke (1994-2003) indicates: Camshaft Position Sensor Circuit Range/Performance. This is a known diagnostic trouble code on this engine family and typically points to the causes listed above.

Can I drive with P0341 on my Power Stroke?

Yes, you can generally drive with this code, but diagnose it soon to prevent further damage.

How much does it cost to fix P0341?

Repair cost is typically $80-$250 depending on the underlying cause and whether you DIY or use a shop. Diagnostic time alone runs $100-$180 at most independent diesel shops.

Mechanics Guide Step-by-step diagnosis

How Do You Diagnose POWERSTROKE-P0341?

  1. Confirm P0341 and record freeze frame (typically failures occur above 180F coolant temp).

  2. Check CMP connector for bent or backed-out pins, and look for engine oil migrating through the harness.

  3. Scope the sensor signal -- a healthy 7.3L CMP produces clean square/AC pulses. Dropouts = failed sensor.

  4. Replace with Motorcraft CMP. Keep a spare in the glove box -- this is the classic 7.3L stranding failure.

Sources 1

This page is built from documented references. Verify against your own service info before repair work.

  • SAE J2012Diagnostic Trouble Code Definitions (defines P0341 as a generic OBD-II code)

P0341 on Other Platforms

The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:

Gas / Automotive (OBD-II) Generic OBD-II definition for P0341 Duramax serious Camshaft Position Sensor A Circuit Range/Performance Kubota serious Camshaft Position Sensor A Range/Performance PACCAR serious Camshaft Position Sensor Performance

Which Vehicles Commonly Get POWERSTROKE-P0341?

  • 1994.5-1997 Ford F-250/F-350 7.3L Power Stroke
  • 1999-2003 Ford F-250/F-350 Super Duty 7.3L Power Stroke
  • 1999-2003 Ford F-450/F-550 Super Duty 7.3L Power Stroke
  • 1994.5-2003 Ford E-350/E-450 7.3L Power Stroke
  • 2000-2003 Ford Excursion 7.3L Power Stroke

Explore More

More Power Stroke codes → Diesel home All diesel codes Heavy-duty Guides

Was this helpful?

Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.