Cylinder 7 Injector Circuit High
The POWERSTROKE-P0280 (Power Stroke) diesel fault code means: Cylinder 7 Injector Circuit High. This is a serious severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- advanced
- Estimated cost
- $400-$2,800 (single injector) up to $5,500 (full set of 8)
Down with a Power Stroke fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Cylinder 7 misfire
- Rough idle
- Loss of power
- Smoke from exhaust
- CEL
Probable Causes (Ranked by Likelihood)
- Failed cylinder 7 injector solenoid (6.0L injectors have a high failure rate) Very Likely
- Leaking oil rail o-rings (causes multiple cylinder codes) Likely
- Damaged harness under valve cover Likely
- Failed FICM driver channel Possible
Step-by-Step Diagnostic Procedure
Perform KOER injector buzz test -- non-buzzing cylinder confirms bad injector or wiring to cylinder 7.
Check for high CCT (injector contribution) variance between cylinders.
If multiple cylinders report low-side issues, suspect leaking stand-pipes or oil rail o-rings.
Replace injector #7 as a set with at least the companion cylinder (pairs share oil rail).
Frequently Asked Questions
What is P0280 on a 6.0L Power Stroke?
P0280 on a 6.0L Power Stroke (2003-2007) indicates: Cylinder 7 Injector Circuit High. This is a known diagnostic trouble code on this engine family and typically points to the causes listed above.
Can I drive with P0280 on my Power Stroke?
Only drive short distances to get to a repair facility. Continued operation may cause further damage.
How much does it cost to fix P0280?
Repair cost is typically $400-$2,800 (single injector) up to $5,500 (full set of 8) depending on the underlying cause and whether you DIY or use a shop. Diagnostic time alone runs $100-$180 at most independent diesel shops.
P0280 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown: