Aftertreatment DPF Outlet Temperature - Voltage Above Normal or Shorted to High Source
What does JD-SPN3610-FMI3 mean?
The JD-SPN3610-FMI3 (John Deere PowerTech) diesel fault code means: Aftertreatment DPF Outlet Temperature - Voltage Above Normal or Shorted to High Source. This is a moderate severity code.
Common Symptoms
- Frequent passive regen never completes (short-duty tractors)
- DPF lamp + derate on soot load > 100%
- Parked regen request every few hours
Probable Causes (Ranked by Likelihood)
- Short-duty-cycle use stopping passive regen from occurring Very Likely
- Differential pressure sensor hose plugged / cracked Likely
- Ash loaded beyond service interval (5,000+ hrs) Likely
- DPF substrate cracked from over-temp regen Possible
Step-by-Step Diagnostic Procedure
Record DPF ΔP and soot load in Service ADVISOR at rated load.
Command parked regen and monitor DPF inlet temperature ramp.
Clean DPF differential pressure sensor hoses (common on compact tractors).
If ash load > 95%, remove and send out for ash cleaning.
Frequently Asked Questions
What is John Deere fault code SPN 3610 FMI 3?
On John Deere PowerTech engines, SPN 3610 FMI 3 means: Aftertreatment DPF Outlet Temperature - Voltage Above Normal or Shorted to High Source. Moderate code -- diagnose soon; continued operation may increase repair scope.
Can I keep using my John Deere tractor with SPN 3610 FMI 3?
Moderate fault -- you can usually keep working but expect derate if aftertreatment-related. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.
How much does it cost to fix John Deere SPN 3610 FMI 3?
Repair cost range: $450-$1,200 differential pressure sensor, $1,800-$4,500 DPF clean / replace. Dealer labor on large tractors runs $180-$240/hr in 2026.