EGR Valve Position Sensor - Voltage Above Normal
The JD-SPN27-FMI3 (John Deere PowerTech) diesel fault code means: EGR Valve Position Sensor - Voltage Above Normal. This is a moderate severity code.
Unverified. We could not confirm this code's definition against freely available manufacturer documentation, so treat the meaning, severity and fix guidance on this page as unconfirmed. Check it against the manufacturer's service information for your exact model and serial range before acting on it. This page is kept out of search engines for that reason, and we are working through this family manual by manual.
- Keep driving?
- Yes, with caution
- DIY difficulty
- intermediate
- Estimated cost
- $450-$1,200 EGR valve, $60-$180 cleaning kit
What Are the Symptoms of JD-SPN27-FMI3?
- Check engine lamp
- Rough run, carbon smell at exhaust
What Causes JD-SPN27-FMI3? (Most Likely First)
- EGR valve stuck open from carbon build-up (classic early Tier 4) Very Likely
- Failed EGR position sensor Likely
- Harness short Possible
Can I Still Drive with JD-SPN27-FMI3?
Yes, with caution. JD-SPN27-FMI3 is rated moderate severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What is John Deere fault code SPN 27 FMI 3?
On John Deere PowerTech engines, SPN 27 FMI 3 means: EGR Valve Position Sensor - Voltage Above Normal. Moderate code. Keep working cautiously and plan repair.
Can I keep using my John Deere tractor with SPN 27 FMI 3?
Moderate fault -- continue light use, fix at next service. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.
How much does it cost to fix John Deere SPN 27 FMI 3?
Repair cost range: $450-$1,200 EGR valve, $60-$180 cleaning kit. Dealer labor on large tractors runs $180-$240/hr in 2026.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose JD-SPN27-FMI3?
Command EGR valve sweep in Service ADVISOR; valve must travel 0-100%.
Remove EGR valve and manually walnut-blast carbon from seat.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
SPN27-FMI3 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Which Vehicles Commonly Get JD-SPN27-FMI3?
- 2014+ John Deere 6R Series tractors
- 2015+ John Deere 7R Series tractors
- 2015+ John Deere 8R / 8RT Series tractors
- 2015+ John Deere 9R / 9RT / 9RX Series tractors
- 2015+ John Deere S670 / S680 / S690 combines
- John Deere S770 / S780 / S790 combines
- John Deere 544/644/724 wheel loaders (construction)
- John Deere 310/410 backhoes
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.