JD-SPN182-FMI10 moderate John Deere PowerTech ›

Trip Fuel Rate - Abnormal Rate of Change

The JD-SPN182-FMI10 (John Deere PowerTech) diesel fault code means: Trip Fuel Rate - Abnormal Rate of Change. This is a moderate severity code.

My Garage →
Keep driving?
Yes, but fix soon
DIY difficulty
intermediate
Estimated cost
$0-$180 software / operator-guide update
Built for Diesel — Not a Car Reader
ANCEL HD7000 Heavy-Duty Diesel Scanner

A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Lower-Cost Diesel Option
FOXWELL HD301 Diesel Truck Scanner

Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Informational code -- no power loss
  • Data-logging / telematics warning on JDLink

Probable Causes (Ranked by Likelihood)

  • Stale or missing configuration parameter Likely
  • Historical over-range event already resolved Likely
  • GPS / CAN broadcast mismatch Possible

Step-by-Step Diagnostic Procedure

  1. Verify current configuration vs. dealer PIP update.

  2. Clear the code; if it does not return after 10 engine hours, consider resolved.

Frequently Asked Questions

What is John Deere fault code SPN 182 FMI 10?

On John Deere PowerTech engines, SPN 182 FMI 10 means: Trip Fuel Rate - Abnormal Rate of Change. Moderate code -- diagnose soon; continued operation may increase repair scope.

Can I keep using my John Deere tractor with SPN 182 FMI 10?

Moderate fault -- you can usually keep working but expect derate if aftertreatment-related. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.

How much does it cost to fix John Deere SPN 182 FMI 10?

Repair cost range: $0-$180 software / operator-guide update. Dealer labor on large tractors runs $180-$240/hr in 2026.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More