Intake Manifold Temperature - Data Valid but Above Normal Operational Range (Moderately Severe)
What does JD-SPN105-FMI16 mean?
The JD-SPN105-FMI16 (John Deere PowerTech) diesel fault code means: Intake Manifold Temperature - Data Valid but Above Normal Operational Range (Moderately Severe). This is a moderate severity code.
Common Symptoms
- Fault lamp on operator display
- Possible derate once confirmed active
- Inaccurate dashboard readout for the affected parameter
Probable Causes (Ranked by Likelihood)
- Failed sensor element or contaminated sensor tip Likely
- Broken, chafed, or corroded sensor harness connector Very Likely
- Open / short to ground between sensor and ECU Possible
- ECU signal input fault (rare) Less Likely
Step-by-Step Diagnostic Procedure
Use John Deere Service ADVISOR (CF3/EDL v3) and capture live sensor value vs. expected range.
Back-probe the sensor harness -- verify 5V reference and signal return at the ECU connector.
Swap the sensor with a known-good matching part number and clear the code.
Check CAN data trace for sensor broadcast on J1939 before condemning the ECU.
Frequently Asked Questions
What is John Deere fault code SPN 105 FMI 16?
On John Deere PowerTech engines, SPN 105 FMI 16 means: Intake Manifold Temperature - Data Valid but Above Normal Operational Range (Moderately Severe). Moderate code -- diagnose soon; continued operation may increase repair scope.
Can I keep using my John Deere tractor with SPN 105 FMI 16?
Moderate fault -- you can usually keep working but expect derate if aftertreatment-related. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.
How much does it cost to fix John Deere SPN 105 FMI 16?
Repair cost range: $90-$320 sensor + install. Dealer labor on large tractors runs $180-$240/hr in 2026.