Intake Manifold Pressure High - Overboost
The JD-SPN102-FMI16 (John Deere PowerTech) diesel fault code means: Intake Manifold Pressure High - Overboost. This is a serious severity code.
- Keep driving?
- Yes, with caution
- DIY difficulty
- advanced
- Estimated cost
- $900-$1,800 VGT actuator, $2,400-$4,500 turbo assembly
What Are the Symptoms of JD-SPN102-FMI16?
- Power derate at WOT
- Turbo whistle or surge
- Possible intercooler boot popping off
What Causes JD-SPN102-FMI16? (Most Likely First)
- Stuck variable-geometry turbo (VGT) vanes carboned open Very Likely
- Failed VGT actuator / stepper motor Likely
- Leaking or miscommanded wastegate (on PVS fixed-geometry) Possible
- Exhaust back-pressure sensor drift Less Likely
Can I Still Drive with JD-SPN102-FMI16?
Yes, with caution. JD-SPN102-FMI16 is rated serious severity. Keep trips short and get it diagnosed soon rather than waiting for symptoms to worsen.
Frequently Asked Questions
What is John Deere fault code SPN 102 FMI 16?
On John Deere PowerTech engines, SPN 102 FMI 16 means: Intake Manifold Pressure High - Overboost. Serious code -- address promptly to avoid inducement / further damage.
Can I keep using my John Deere tractor with SPN 102 FMI 16?
Serious fault -- you can move the machine to a shop but don't run it under load. Diagnose with John Deere Service ADVISOR via an EDL v3 / CF3 interface.
How much does it cost to fix John Deere SPN 102 FMI 16?
Repair cost range: $900-$1,800 VGT actuator, $2,400-$4,500 turbo assembly. Dealer labor on large tractors runs $180-$240/hr in 2026.
Mechanics Guide Step-by-step diagnosis
How Do You Diagnose JD-SPN102-FMI16?
Command VGT sweep with Service ADVISOR -- vanes should move 0-100% smoothly.
Inspect turbo for soot lock; on Tier 4 Final 6.8L/9.0L PSS this is a known issue under light duty-cycle tractor work.
Road-test / PTO dyno at rated RPM and log actual vs. commanded boost.
Sources 1
This page is built from documented references. Verify against your own service info before repair work.
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
Which Vehicles Commonly Get JD-SPN102-FMI16?
- 2014+ John Deere 6R Series tractors
- 2015+ John Deere 7R Series tractors
- 2015+ John Deere 8R / 8RT Series tractors
- 2015+ John Deere 9R / 9RT / 9RX Series tractors
- 2015+ John Deere S670 / S680 / S690 combines
- John Deere S770 / S780 / S790 combines
- John Deere 544/644/724 wheel loaders (construction)
- John Deere 310/410 backhoes
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.