Manifold Absolute Pressure / NOx Sensor Correlation
The ISUZU-P220B (Isuzu) diesel fault code means: Manifold Absolute Pressure / NOx Sensor Correlation. This is a moderate severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- intermediate
- Estimated cost
- $500-$2,800
Down with a Isuzu fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Affiliate links — we earn a commission at no extra cost to you.
Common Symptoms
- DEF warning light + progressive derate (5 mph in final stage)
- No-restart inducement after derate timer expires
- Frequent DEF refills / excessive DEF consumption
- White crystals around DEF doser tip
- High NOx readings in live data
Probable Causes (Ranked by Likelihood)
- Failed NOx inlet or outlet sensor (highest-frequency SCR fault) Very Likely
- Crystallized DEF at injector/doser tip from short trips Likely
- DEF pump module motor worn or air-locked Possible
- Contaminated DEF (aged, diluted, or wrong fluid) Possible
- Exhaust leak upstream of SCR skewing NOx readings Less Likely
Frequently Asked Questions
What does Isuzu code P220B mean?
Isuzu diagnostic trouble code P220B (Manifold Absolute Pressure / NOx Sensor Correlation) is a moderate-severity fault on Isuzu medium-duty diesel engines. It indicates a problem in the SCR / DEF system that should be verified with a scan tool (Isuzu IDSS / Tech2 for Isuzu) before replacing any parts.
Can I drive my Isuzu truck with P220B?
Short runs may be possible but do not ignore — Isuzu medium-duty aftertreatment faults cascade quickly into 5-mph derate or no-restart. Schedule diagnosis immediately.
How much does it cost to fix Isuzu P220B?
Estimated repair cost runs $500-$2,800. Sensor, wiring, and DEF-related repairs fall at the low end; DPF service, turbo, injector, and EGR cooler work fall at the high end and may require dealer-level programming.
Mechanics Guide Step-by-step diagnosis
Step-by-Step Diagnostic Procedure
Connect IDSS and verify P220B. Capture NOx inlet/outlet values and DEF dosing state.
Refractometer-test DEF — correct concentration is 32.5% urea; below 30% = replace fluid.
Command DEF pump pressure build test; confirm target pressure reached within spec time.
Inspect DEF doser for crystallization. Remove, soak in warm distilled water, blow out, reinstall.
Replace NOx sensors if live-data drift or 'slow response' condition is present; both sensors often fail together.
Sources 2
This page is built from documented references. Verify against your own service info before repair work.
- SAE J1939-73Application Layer: Diagnostics (defines the SPN/FMI fault-identifier framework)
- SAE J2012Diagnostic Trouble Code Definitions (defines P220B as a generic OBD-II code)
P220B on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown:
Commonly Affected Vehicles
- Isuzu NPR / NPR-HD with 4HK1 5.2L
- Isuzu NPR-XD / NQR with 4HK1 5.2L
- Isuzu NRR with 4HK1 / 6HK1
- Isuzu FTR / FVR medium-duty with 6HK1 7.8L
- Chevrolet / GMC 4500 / 5500 (Isuzu-chassis) with 4HK1
- Isuzu NPR-ECO-MAX with 3.0L 4JJ1
Explore More
Was this helpful?
Send this to whoever is fixing the truck — your tech, or the person asking what the fault means.