Fuel Pressure Regulator 1 Control Circuit High
The DURAMAX-P0092 (Duramax) diesel fault code means: Fuel Pressure Regulator 1 Control Circuit High. This is a serious severity code.
- Keep driving?
- No -- stop driving
- DIY difficulty
- advanced
- Estimated cost
- $400-$800 FPR, $7,000-$12,000 full CP4 failure repair, $4,500-$6,000 CP3 conversion
Down with a Duramax fault on the road?
Get connected with a verified mobile diesel mechanic near you. Verified diesel & reefer techs, launching on the freight corridor.
Find a mobile mechanic →A $30 car code reader can't do diesel. The HD7000 reads full-system codes and does parked DPF regen, idle/speed-limit, and service resets from the cab — on everything from a 6.7 Cummins/Power Stroke/Duramax pickup to Class-8 trucks (Detroit, Paccar, CAT, Volvo, Mack, International).
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Full-system 6/9/16-pin diesel scan tool for Cummins, Paccar, CAT, Detroit and more — plug-and-play, no subscription. A cheaper way to read heavy-duty codes a basic OBD2 scanner skips entirely.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Extended cranking or no start
- Loss of power / 'Reduced Engine Power' message
- Limp mode
- Metal shavings in fuel filter (if CP4 failed)
- Strong fuel smell
Probable Causes (Ranked by Likelihood)
- FPR solenoid circuit open / high Very Likely
- Failed fuel pressure regulator / FCA valve Likely
- Plugged fuel filter (service interval every 15K) Possible
- Air in fuel system Less Likely
- Cracked high-pressure fuel line Less Likely
Step-by-Step Diagnostic Procedure
Pull the fuel filter and inspect for metal debris. Metal = entire fuel system contaminated, requires full replacement.
Check fuel rail pressure with scan tool at key-on and during crank. Should see ~5,000+ psi at crank on LML/L5P
Test the fuel pressure regulator before condemning the pump — cheaper to replace first
Inspect fuel tank pickup and lift pump output
If CP4 pump has failed, recommend a CP3 conversion kit to prevent repeat failure
Frequently Asked Questions
What is P0092 on a Duramax?
Duramax code P0092 (Fuel Pressure Regulator 1 Control Circuit High) is a serious-severity diagnostic trouble code triggered by the engine control module when it detects a problem in the associated system. The Bosch CP4.2 pump in LML and L5P Duramax engines is known for catastrophic self-destruction, contaminating the entire fuel system.
Is a Duramax P0092 safe to drive?
NO. If the CP4 pump has failed, continuing to drive spreads metal through injectors, lines, and tank. Tow to the shop.
How much does it cost to fix P0092 on a Duramax?
FPR $400-$800. Plugged filter $40-$100. Full CP4 failure $7,000-$12,000. CP3 conversion $4,500-$6,000.
P0092 on Other Platforms
The same code ID appears across other engines, vehicles, and equipment. Diagnostic flow varies by platform — see the matching breakdown: