Español
CAT-SPN1761-FMI1 moderate Caterpillar ›

DEF Tank Level Low

My Garage →
Can I Drive?
Yes, But Fix Soon
DIY Difficulty
intermediate
Estimated Cost
$200-$1500

What does CAT-SPN1761-FMI1 mean?

The CAT-SPN1761-FMI1 (Caterpillar) diesel fault code means: DEF Tank Level Low. This is a moderate severity code.

Common Symptoms

  • Check Engine Light or warning lamp
  • Engine protect / derate / shutdown possible
  • System performance affected

Probable Causes (Ranked by Likelihood)

  • Sensor / actuator internal failure Likely
  • Wiring or connector issue in the affected circuit Likely
  • Related system mechanical issue Possible
  • ECM calibration or software issue Less Likely

Step-by-Step Diagnostic Procedure

  1. Connect CAT ET and confirm the SPN/FMI is active; record live data for the affected parameter.

  2. Inspect wiring and connectors for the affected circuit; back-probe and check with a DMM.

  3. Perform component test on the sensor / actuator per CAT service manual.

  4. Repair wiring, replace component, or reflash ECM as CAT ET diagnostics direct.

Frequently Asked Questions

What does CAT SPN1761-FMI1 mean?

CAT SPN1761-FMI1 (DEF Tank Level Low) is a moderate-severity fault reported over the J1939 data link. DEF tank below threshold (rare — very few CAT on-hwy sold post-2010). CAT ECMs report many of the same faults both as CID/FMI (proprietary) and SPN/FMI (J1939) — either form points to the same physical issue.

Can I drive with CAT SPN1761-FMI1?

Short distances may be acceptable, but plan the repair promptly. Ignoring the fault risks progressive damage or derate.

How much does CAT SPN1761-FMI1 cost to fix?

Typical repair is $200-$1500. Simple sensor/wiring repairs fall at the low end; component, actuator, or aftertreatment work falls at the high end and usually requires CAT ET for programming.

Explore More

More Caterpillar codes → | Diesel home | All diesel codes | Heavy-duty | Guides