Air Filter Restriction High
What does CAT-SPN107-FMI0 mean?
The CAT-SPN107-FMI0 (Caterpillar) diesel fault code means: Air Filter Restriction High. This is a minor severity code.
Common Symptoms
- Check Engine Light or warning lamp
- Engine protect / derate / shutdown possible
- System performance affected
Probable Causes (Ranked by Likelihood)
- Sensor / actuator internal failure Likely
- Wiring or connector issue in the affected circuit Likely
- Related system mechanical issue Possible
- ECM calibration or software issue Less Likely
Step-by-Step Diagnostic Procedure
Connect CAT ET and confirm the SPN/FMI is active; record live data for the affected parameter.
Inspect wiring and connectors for the affected circuit; back-probe and check with a DMM.
Perform component test on the sensor / actuator per CAT service manual.
Repair wiring, replace component, or reflash ECM as CAT ET diagnostics direct.
Frequently Asked Questions
What does CAT SPN107-FMI0 mean?
CAT SPN107-FMI0 (Air Filter Restriction High) is a minor-severity fault reported over the J1939 data link. Plugged air filter. CAT ECMs report many of the same faults both as CID/FMI (proprietary) and SPN/FMI (J1939) — either form points to the same physical issue.
Can I drive with CAT SPN107-FMI0?
Short distances may be acceptable, but plan the repair promptly. Ignoring the fault risks progressive damage or derate.
How much does CAT SPN107-FMI0 cost to fix?
Typical repair is $100-$500. Simple sensor/wiring repairs fall at the low end; component, actuator, or aftertreatment work falls at the high end and usually requires CAT ET for programming.