Invalid Data Received From VIN Mismatch
The U0630 code means the vehicle's onboard diagnostic system has detected: Invalid Data Received From VIN Mismatch. This is a critical severity code.
- Keep driving?
- No -- stop driving
- DIY difficulty
- hard
- Estimated cost
- $200 - $1,000
Network codes mean modules are not communicating. You need a scanner that reads all systems to find the problem.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Vehicle will not start
- Security light on
- Multiple modules reporting errors
- Key not recognized
Probable Causes (Ranked by Likelihood)
- Module replaced without VIN programming Very High
- Used module installed from different vehicle High
- VIN corruption in module memory Moderate
- Communication error during VIN write Low
Step-by-Step Diagnostic Procedure
-
Scan all modules for VIN information
-
Reprogram modules with correct VIN at dealer
-
Verify all modules have matching VINs
-
Check for used or refurbished module installation
Frequently Asked Questions
Can I drive with U0630?
Check the severity. If it affects safety systems like stability control or braking, limit driving to short distances. Comfort features like heaters or parking assist are safe to drive with.
What causes U0630?
Most commonly a faulty vin mismatch or damaged wiring in the communication circuit to that module.
How much does it cost to fix U0630?
Typical repair costs range from $200 - $1,000 depending on whether the module or just wiring needs repair.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.