Invalid Data Received From ABS Control Module
The U0415 code means the vehicle's onboard diagnostic system has detected: Invalid Data Received From ABS Control Module. This is a critical severity code.
- Keep driving?
- Short distances only
- DIY difficulty
- hard
- Estimated cost
- $300 - $1,500 (parts and labor)
Network codes mean modules are not communicating. You need a scanner that reads all systems to find the problem.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- ABS warning light on
- Traction control disabled
- Stability control not functioning
- Unusual brake pedal pulsation
- Brake system warning message
Probable Causes (Ranked by Likelihood)
- ABS module sending corrupt data Very High
- Wheel speed sensor intermittent fault High
- CAN bus noise affecting ABS data Moderate
- ABS hydraulic unit failure Low
Step-by-Step Diagnostic Procedure
-
Scan ABS module for wheel speed sensor codes
-
Test individual wheel speed sensors
-
Check CAN bus signal quality at ABS module
-
Inspect ABS module connector
Frequently Asked Questions
Can I drive with U0415?
Short distances carefully. ABS, traction, and stability control may not function.
What causes U0415?
Usually the ABS module sending corrupt data due to internal failure or sensor issues.
Is U0415 dangerous?
It can be in slippery conditions. Brakes still work but ABS does not.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.